Top Row: H250 Series Blast pot (shown in optional colors) with our EXCLUSIVE
Ultra Tuff polyurea tank coating! It does NOT chip! See the close-up of the fill
Bottom Row: 185 CFM and 400 CFM aftercoolers, Our typical accessory package
and our Exclusive HEPA Filter with Performance Flow Indicator
(click on any picture to enlarge it)
All-Media Eco-Blasting Pots
Five Year Warranty!
First came the industry leading
H250-M3 Green Collarô Series
ALL-Media Blast Pot
and now we are proud to offer the
H258-LP-HO ALL-Media Blast Pot
The same high quality as the m3 but including the "Low Pressure capability and
High Output" flow components. This package will increase your production by 27%
- Blast pressure - low = 30 PSI
- Blast pressure - high = 125 PSI (normal)
- Blast pressure - high = 185 PSI (optional)
- Height = 46"
- Width = 26"
- Depth = 38"
- Weight = 225 lbs. (empty)
We are proud to offer you our complete
package featuring Harmon Distributingís exclusive H250 Green Collarô Series
Eco-Blasting Equipment which will include everything you need to begin
Eco-Blasting. The H250 Green Collarô Series ALL-Media Eco-Blasting Pot was four years in
design with hundreds of hours of actual field testing.
The H250 Green Collarô Series equipment package does not have hidden cost options. Our
pot package includes the aftercooler
for the compressor air and TWO automatic
moisture separating equipment. The machine we offer to you is exactly the same
Eco-Blasting pot package we ship to off-shore drilling platforms and export to 6 other
countries. The Harmon H250 Green Collarô Series blast pot was designed to be small enough
to go through doors, to be maneuvered easily on walkways and through tight spaces allowing you to get
closer to the worksite and to reduce your having to extend the expensive,
heavy blast hose that would be needed to reach those hard to get to work areas.
The 4 years of development and
those hundreds of hours of operation have proven the Harmon H250 Green
Collarô Series design is the only design capable and field proven to economically meter not
only ALL blast media types but to be able to use ALL SIZES YOU WANT TO USE. The
Harmon H250 Green Collarô Series excels when metering
using our non-sparking, extremely effective K2, the
MaxxStrip as well as the
SofStrip XL sodium bicarbonate Eco-Media.
H250 Green Collarô Series pot is
handcrafted with pride at our facility in Portland, Oregon.
May we build one
We do not offer factory seconds or have "Scratch and Dent Sales". We only build
them for you one way. The right way.
Each pressure vessel is
individually inspected by an engineer from the American Society of Mechanical
Engineers (ASME), then hydro pressure tested at 240 PSI for 24 hours and is then certified to operate continuously at 180 PSI. Each vessel is then given
it's own individual, permanent serial number.
Each of those serial numbers is recorded and kept permanently on
record by which can then identify each vessel in future years.
∑ Certification for European (PED/CE)
and Canadian standards are pending.
H250 Green Collarô Series blast pots are mounted on our own
specially designed modular 800 LB capacity, pneumatic 4-ply tired, hand truck for better
balance and ease of movement. Other mounting options can be made available as
H250 Green Collarô Series All-Media Blast Pots - EXCLUSIVE PRODUCT FEATURES:
The H250 Green Collarô Series has the exclusive capability to economically use ALL
H250 Green Collarô Series has a newly designed media control
valve with TUNGSTEN CARBIDE components to minimize wear when using harder
sand type abrasives.
- THERE ARE NO "O' RINGS TO
BE CUT OR TO BREAK IN OUR METERING FLOW
THERE ARE NO BALL VALVES IN THE MEDIA FLOW WITH SEATS THAT
NEED TO BE REPLACED!
- Exclusive:0.01 Micron HEPA Filter
Moisture Separator with Go/No Go Flow Performance Sight Glass Indicator with
auto moisture drain
- Exclusive: The H250 Green Collarô Series ALL-Media Eco-Blast pot can be converted from soda blaster to a cob
blaster or to a sand blast machine and back again by just changing the media
in the tank. NO DISASSEMBLY IS REQUIRED TO CHANGEOVER!
- Exclusive: The H250 Green Collarô Series metering valve is
SELF-CLEANING eliminating most teardowns for media flow stoppages.
Exclusive: The H250 Green Collarô
Series can blast with
the normal media/air mixture exiting the hose and then be instantly switched to blow off the work surface
with air flow only through the same blast line!
- Exclusive: The H250 Green Collarô Series
is the only machine in the market with
polyurea non-chip coating!
(Think hot spray truck bed liner) This is the same material being applied to
our military vehicles in the middle east to increase the armor protection
without increasing the weight.
The H250-m3 has a larger tank
capacity of 2.5 cubic feet
The H250-m3 has a larger sized
maintenance/fill port (4") for ease of use.
The H250-m3 has an 18" fill funnel with a 3" spout for the fastest refilling
Each H250-m3 pressure vessel is
hydraulically safety tested to 240 PSI
The H250-m3 is certified to operate
at a 100% continuous duty cycle of 180 PSI
The H250-m3 comes standard with 125
PSI production components but can be special ordered with the optional 150 PSI
"High Output Production Package"
The H250-m3 pressure vessel is triple powder coated and uses 304 stainless
steel piping and hardware
The H250-m3 can be special ordered and powder coated in the color of your
choice or painted over the polyurea to custom color match the H250 Green Collarô Series with YOUR company trucks,
compressors or franchise colors. The green pressure vessel shown in the
picture above is painted a franchise color over polyurea.
H257-LP MSRP with soda, cob
the aftercooler and two high flow moisture separators is $7,995.00
The H250 Green Collarô Series can also be ordered as an
H2500 self contained trailer mounted unit featuring the Airman 185 compressor.
The Airman 185 compressor is the quietest, most fuel efficient compressor
available in the marketplace.
Harmon Distributing is proud to unveil the H258-HO-LP Multi-Media Blast Pot.
Like the H257-LP blast pot the H258-HO-LP is the most versatile, cost-effective, size-efficient and operator friendly blast pot in the industry
while increasing blast production by 27%!
THE H250 Green Collarô Series IS IS THE ONLY BLAST POT YOU WILL EVER NEED!
THE H250 Green Collarô Series IS THE LAST BLAST POT YOU WILL
EVER NEED TO PURCHASE!
In order to build a better machine Harmon Distributing addressed the
system had to be more portable and light enough to be put into the back of a
pick up truck or trailered to a job site.
system had to be versatile. It had to be able to use multiple medias and
media particle sizes, without major
adjustments or not compromise operator safety.
The system had to solve the problem of moisture control.
system had to be easy to maintain, be able to work long hours without complete
teardown, and with brief instruction, simple enough to use by anyone without
the need for extensive training.
The system had to be able to use a variety of source air compressor
system had to be cost effective.
years of design and field testing, Harmon Distributing answered ALL these requirements with the
H250 Green Collarô Series. The H250 Series' is designed to
handle the need for all Multi-Media requirements by being able to use...
Potassium sulfate, Sodium bicarbonate,
Magnesium sulfate, Corncob and ALL STANDARD SAND BLAST MEDIA'S. This makes the
H250 Green Collarô Series the most
versatile system on any job site.
The H250 Green Collarô Series All-Media Blast Pots have:
- 2.5 cubic foot tank
- 2 bag capacity
- High carbon boiler plate steel tank and carriage
- High tensile strength, non-chip polyurea tank coating
- Stainless steel piping and hardware
- Weather proof electrical housing and wiring conduit
- Blast pressure as low as 25 PSI!
- Blast pressure as high as 185 PSI!
- Metering Valve
- SELF CLEANING METERING VALVE!
- Tungsten Carbide wear components
- Quick, precise media flow adjustment
- Allows for adjustment to an average usage rate of 3/4 lb. to 1-1/2 lbs. media flow per
- Pots that have not been specifically designed to properly meter light, fine
media such as soda or corn cob
can use an average of three to four - 50
lb. bags per hour.
GOES YOUR PROFIT MARGIN!
- Pots that have not been
specifically designed to properly meter Heavy, Coarse media such as glass,
sand and slag cut and wear out "O" rings and standard steel components.
- THERE GOES YOUR PRODUCTION
TIME and YOUR PROFIT MARGIN!
- Two separate Air pressure adjustment regulators, one moisture separator
and an auxiliary air tap are located at and on the machine
- This allows you to adjust blast line pressure (PSI) at the pot
all the way back to and inside the compressor housing.
- These Eco-Media blast pots are specifically designed so that you can use up to a #7 (7/16") tip
@65 PSI without
losing blast efficiency by having a restriction creating an internal pressure loss inside the pot
~~ THE COMPETITION DOES NOT, CANNOT and
DARE NOT ATTEMPT TO
COMPARE THEIR MACHINE TO OUR H250 SERIES LEVEL
QUALITY and PERFORMANCE! ~~
John R Harmon
This price reflects a COMPLETE package, ready for you to use!
We deliver NATIONALLY or INTERNATIONALLY
Freight NOT Included
Low Pressure (30 PSI to 125 PSI)
Higher Output - Low Pressure
High Output - Low Pressure
NOTE: Unlike our competitors, this package includes our
own 185 CFM industrial high-flow compressor air aftercooler
which can be upgraded to the 400 CFM! The
only additional things required to operate is the air compressor
and the blast media.
All models can operate at their lowest
pressure with the most gentle media needed.
|Soda-Blast.Com is Harmon Distributing's industrial
products division. While baking
and corn cob is the mainstay of the company, this division offers a
developed line of products and applicators that deliver either baking
corn cob as a parts cleaning medium in metalworking shops.
For most metalworking shops parts cleaning is, well, a pain. It's a
non-value added step in the manufacturing process that while, often
necessary, gets metalworking businesses into areas in which they have
little or no expertise.
If a shop must clean parts, what's the best method? Of course there
is no easy answer. It used to be possible to soak parts in a vapor
degreaser and accomplish most soil removal requirements. That's no
longer feasible because of environmental regulations covering
atmospheric discharges and toxic waste disposal.
Options include parts aqueous and semi-aqueous washing units with
agitation sometimes generated by ultrasonics. These methods work well
for specific materials and soils but lack the kind of general purpose
effectiveness that vapor degreasing provides. And, there is usually a
waste disposal consideration with these wet processes. Then there are
dry cleaning processes. These usually employ a grit which is
accelerated to high speed to
off dirt or other soils attached to workpieces. Glass beads, metal or
plastic shot--even peanut shells--are versions of this process.
It's into this category of parts cleaning that SofStripô falls.
They have successfully used this baking
on applications in aerospace, paint removal for rebuilding and
remanufacturing operations and in plant maintenance departments.
as a grit
blast medium offers several advantages over other solid
mediums, according to the company. As each crystal of
sodium-bicarbonate strikes the surface of a workpiece it crushes
against the surface. When the crystal strikes a workpiece surface, the
crystal is destroyed but in the process takes a bit of the soil with
Crystals can be sized to provide the necessary cleaning
aggressiveness for an application. In part, because the baking
crystal collapses on contact, removal problems involving getting the
media from internal passages or small bores is eliminated. In
water soluble therefore getting the media out of highly intricate
parts is also simplified. They can be rinsed free out of the workpiece
As a medium, baking
relatively soft. This makes it an effective
medium for delicate substrates such as aluminum and thin wall sections
like cylinder fins or aerospace structures. There is little or no
peening action with baking
is inert making its use and disposal less problematic than some other
Soda-Blast.Com offers a full line of
application equipment to accompany their baking
media. For job shops with a variety of applications, there is a
blast cabinet available with interior dimensions up to height
by width by length of 60 by 24 by 42 inches. There are systems
available for higher volume/lower mix applications as well.
Cleaning workpieces and equipment is a necessity for many shops.
Unfortunately there is no universal method effective for all cases.
offers several advantages over other methods, particularly with regard
to environmental and disposal considerations. That may make checking
into a system for your application a good idea.ó